FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › Engine Performance › System › Engine Controls And Fuel - 4.6L (LH2) - Introduction, Specifications & Repair Instructions › Repair Instructions › Ignition Coil Module Replacement - Left Side › Installation Procedure

Installation Procedure

    Fig 1: View Of Left Ignition Coil Assembly, Bolts & Ball Studs
    GM928220Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil assembly.
    2. Fig 2: View Of Fuel Injector Sight Shield/Top Cover
    GM1272602Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil assembly retaining bolts and tighten to 10 N.m (89 lb in).
  3. Reconnect the ignition coil assembly electrical connector.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
About FixVault