FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › External Pages › Different car › Section 118 (Lighting Systems) › Repair Instructions › Front Fog Lamp Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bulb/socket to fog lamp. Refer to Front Fog Lamp Bulb Replacement .
    2. Fig 1: View Of Fog Lamp, Bulb/Socket & Nuts
    GM915125Courtesy of GENERAL MOTORS CORP.
  2. Install the fog lamp (1) to the fascia.
    3. NOTE: Refer to Fastener Notice .
  3. Install fog lamp nuts (3).

    Tighten:  Tighten the nuts to 6 N.m (53 lb in).

  4. Connect the fog lamp electrical connector to the bulb/socket (2).
  5. Inspect the fog lamp for proper operation.
  6. Install the wheelhouse panel. Refer to Wheelhouse Panel Replacement - Left Side .
  7. Aim the fog lamp. Refer to Fog Lamp Aiming .
About FixVault