FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › External Pages › Different car › Section 139 (Mirror Systems) › Repair Instructions › Mirror Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Refer to Express Down Feature Caution .
    Fig 1: View Of Mirror Harness & Electrical Connectors
    GM63798Courtesy of GENERAL MOTORS CORP.
  1. Position the mirror with the gasket and harness to the door.
    2. Fig 2: View Of Mirror Stud Fasteners
    GM1070816Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  2. Install the fasteners (1) to the mirror.

    Tighten:  Tighten the mirror nuts to 10 N.m (89 lb in).

  3. Route the harness and secure the harness with the harness retainers.
  4. Connect the coaxial cable, if equipped.
  5. Connect the electrical connector(s).
    6. Fig 3: View of Window Clamp Access Plugs
    GM63834Courtesy of GENERAL MOTORS CORP.
  6. Install the mirror nut access plugs.
    7. Fig 4: View Of Door Panel Electrical Connector
    GM1071318Courtesy of GENERAL MOTORS CORP.
  7. Reconnect the electrical/audio connector.
    8. Fig 5: View Of Door Trim Panel
    GM63818Courtesy of GENERAL MOTORS CORP.
  8. Install the door trim panel. Refer to Door Trim Panel Replacement .
About FixVault