FixVault
Home › Cadillac › 2009 › XLR Base › Repair and Diagnosis › External Pages › Different car › Section 147 (Disc Brake System) › Repair Instructions › Front Brake Caliper Bracket Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Brake Caliper Mounting Bracket Guide Surfaces
    GM171985Courtesy of GENERAL MOTORS CORP.
  1. Install the brake caliper mounting bracket to the knuckle.
    2. NOTE: Refer to Fastener Notice .
  2. Install the 2 NEW brake caliper mounting bracket bolts and washers.

    The new brake caliper mounting bracket bolts will come with an adhesive already applied to the threads.

    Tighten:  Tighten the front brake caliper mounting bracket bolts to 175 N.m (125 lb ft).

  3. Lubricate the brake caliper pin bolts with high temperature silicone lubricant.
    4. Fig 2: Identifying Brake Pads, Bracket & Retainers
    GM680415Courtesy of GENERAL MOTORS CORP.
  4. Install the brake pad retainers (1) to the brake caliper bracket (3).
  5. Install the brake pads (2) to the brake caliper bracket (3).
  6. Install the brake caliper. Refer to Front Brake Caliper Replacement .
About FixVault