FixVault
Home › Cadillac › 2010 › CTS V, Standard › Repair and Diagnosis › Brakes › Antilock Brake System With Traction Control System & Stability Control System › Repair Instructions › Rear Wheel Speed Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Wheel Speed Sensor Bolt
    GM1969829Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Fastener Caution .
  1. Install the wheel speed sensor and bolt (1) to the suspension knuckle and tighten to 9 N.m (80 lb in).
    2. Fig 2: Wheel Speed Sensor Wire Harness Clips
    GM1969826Courtesy of GENERAL MOTORS CORP.
  2. Install the wheel speed sensor wire harness clips (1) to the upper control arm and vehicle frame.
  3. Connect the wheel speed sensor electrical connector (2).
  4. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
About FixVault