FixVault
Home › Cadillac › 2010 › DTS 4.6 9 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 4.6L - Repair Instructions - › Repair Instructions › Camshaft Position Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: CMP Sensor
    GM1672561Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the CMP sensor O-ring seal with clean engine oil.
  2. Install the CMP sensor.
    3. CAUTION: Refer to Fastener Caution .
  3. Install the CMP sensor bolt.

    Tighten:  Tighten the bolt to 10 N.m (89 lb in).

    4. Fig 2: Identifying CMP Sensor Wiring Harness Connector
    GM1672927Courtesy of GENERAL MOTORS CORP.
  4. Connect the electrical connector (1) to the CMP sensor.
About FixVault