FixVault
Home › Cadillac › 2010 › DTS 4.6 9 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Control System & Fuel System - 4.6L - Repair Instructions - › Repair Instructions › Camshaft Position Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying CMP Sensor Wiring Harness Connector
    GM1672927Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the electrical connector (1) from the camshaft position (CMP) sensor.
    2. Fig 2: CMP Sensor
    GM1672561Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor bolt.
  3. Remove the CMP sensor.
About FixVault