FixVault
Home › Cadillac › 2010 › Escalade Base, AWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (Hybrid Engine Electrical System) › Repair Instructions › Generator Control Module Ground Strap Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: View Of Drive Motor Generator Control Module Ground Strap & Bolt
    GM1968778Courtesy of GENERAL MOTORS CORP.
  1. Position the ground strap (2) to the drive motor generator control module.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ground strap bolt (1) and tighten to 9 N.m (80 lb in).
  3. Install the air cleaner assembly. Refer to Upper Intake Manifold Cover Replacement .
About FixVault