FixVault
Home › Cadillac › 2010 › Escalade EXT › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Tray Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Battery Tray, Brackets & Nuts
    GM1702822Courtesy of GENERAL MOTORS CORP.
  1. Install the battery tray to the vehicle.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the 3 nuts securing the battery tray to the battery tray bracket.

    Tighten:  Tighten the nuts to 20 N.m (15 lb ft).

  3. Install the nut securing the battery tray to the front fender inner panel.

    Tighten:  Tighten the nut to 9 N.m (80 lb in).

    4. Fig 2: View Of Battery Tray Front Support & Bolts
    GM1702819Courtesy of GENERAL MOTORS CORP.
  4. Install the battery tray front support.
  5. Install the battery tray front support bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  6. Install the battery. Refer to Battery Replacement .
About FixVault