FixVault
Home › Cadillac › 2010 › SRX 2.8 4 › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Front Object Alarm Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Rear Object Sensor Housing
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Replacement .
  2. Disconnect electrical from the front object alarm sensor.
  3. Lift the locking tabs on the housing and remove the front object alarm sensor.
About FixVault