Installation Procedure

Fig 1: Crankshaft Position Sensor & Bolt

GM1311144

Courtesy of GENERAL MOTORS CORP.

Install the crankshaft position sensor.

CAUTION: Refer to Fastener Caution .

Install the crankshaft position sensor bolt and tighten to 10 N.m (89 lb in).

Fig 2: CKP Electrical Connector

GM887868

Courtesy of GENERAL MOTORS CORP.

Connect the CKP electrical connector (3).

Fig 3: Exhaust Manifold Heat Shield

GM945964

Courtesy of GENERAL MOTORS CORP.

Install the exhaust manifold heat shield and tighten to 10 N.m (89 lb in).
Lower the vehicle.