FixVault
Home › Cadillac › 2011 › DTS 4.6 6 › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 4.6L - Repair Instructions › Repair Instructions › Fuel Level Sensor Wiring Harness Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Fuel Tank Electrical Harness Connectors
    GM1671759Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel level sensor wiring harness (1).
  2. Connect the fuel level sensor wiring harness electrical connectors to the pressure sensor and module.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault