Installation Procedure
- Install the rear window. Refer to Adhesive Installation of Stationary Windows .
- Connect the rear window defogger electrical connectors.
- Install the OnStar® antenna. Refer to Cellular Communications/Digital Radio Antenna Replacement .
- Install the rear sail panels. Refer to Sail Panel Replacement .
- Install the four rear window lower reveal molding screws.
Tighten
Tighten the screws to 2 N.m (18 lb in).
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
- Close the rear compartment lid.
CAUTION:
Refer to Fastener Caution .