FixVault
Home › Cadillac › 2011 › DTS 4.6 S › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pump Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Power Steering Return Hose
    GM284266Courtesy of GENERAL MOTORS COMPANY
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Install a drain pan under the vehicle.
  3. Disconnect the power steering return hose from the power steering reservoir.
    4. Fig 2: View Of Power Steering Pressure Hose & Power Steering Pump
    GM284268Courtesy of GENERAL MOTORS COMPANY
  4. Remove the power steering pressure hose from the power steering pump.
    5. Fig 3: Identifying Power Steering Pump Mounting Bolt
    GM284267Courtesy of GENERAL MOTORS COMPANY
  5. Remove the power steering pump mounting bolt.
    6. Fig 4: View of Power Steering Pump
    GM105222Courtesy of GENERAL MOTORS COMPANY
  6. Remove the power steering pump from the vehicle.
  7. Remove the power steering pulley. Refer to Power Steering Pump Pulley Replacement .
  8. Remove the power steering reservoir. Refer to Power Steering Fluid Reservoir Replacement - Off Vehicle .
About FixVault