FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Wiper/Washer Systems › Wiper System And Washer System › Repair Instructions › Windshield Washer Solvent Container Replacement › Installation Procedure

Installation Procedure

    Fig 1: Washer Solvent Container
    GM1669972Courtesy of GENERAL MOTORS CORP.
  1. Transfer washer pumps and level indicator to the new washer solvent container (2).
    2. Fig 2: Windshield Washer Solvent Container
    GM1733024Courtesy of GENERAL MOTORS CORP.
  2. Install the windshield washer container assembly (2).
  3. Install the upper windshield washer container bolt to the auxiliary battery tray, if equipped.
    4. CAUTION:

    Refer to Fastener Caution .

  4. Install the upper windshield washer solvent container bolts and tighten to 9 N.m (80 lb in).
  5. Install the auxiliary battery tray, if equipped. Refer to Auxiliary Battery Tray Replacement .
  6. Install the battery tray, if working on a HYBRID (HP2). Refer to Battery Tray Replacement .
  7. Install the windshield washer solvent cap.
  8. Connect the electrical connectors.
    9. Fig 3: Washer Pump Hoses
    GM1733021Courtesy of GENERAL MOTORS CORP.
  9. Connect the washer pump hoses (1, 2). Refer to Windshield Washer Hose Replacement .
  10. Install the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side .
  11. Install the left front wheel assembly. Refer to Tire and Wheel Removal and Installation .
  12. Fill the washer solvent container with windshield solvent. Refer to Fluid and Lubricant Recommendations .
About FixVault