FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Positive Cable Replacement › Removal Procedure

Removal Procedure

    Fig 1: Under Hood Junction Block Cover
    GM1702793Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the under hood junction block cover.
    3. Fig 2: Junction Block
    GM1702795Courtesy of GENERAL MOTORS CORP.
  3. Lift the junction block retainers from the locked position (3) and rotate the retainers to the open position (1).
  4. Reposition the junction block.
    5. Fig 3: Positive Battery Cable Connector And (UBEC)
    GM1702797Courtesy of GENERAL MOTORS CORP.
  5. Remove the positive battery cable connector (1) from the underhood bussed electrical center (UBEC).
    6. Fig 4: Mega Fuse Cover
    GM1702800Courtesy of GENERAL MOTORS CORP.
  6. Remove the mega fuse cover.
    7. Fig 5: Generator Battery Jumper Cable
    GM1699546Courtesy of GENERAL MOTORS CORP.
  7. Remove the generator battery jumper cable to mega fuse nut (3).
  8. Remove the generator battery jumper cable terminal (4) from the mega fuse stud.
    9. Fig 6: Positive Battery Cable Channel, Clips And Studs
    GM1702801Courtesy of GENERAL MOTORS CORP.
  9. Remove the positive battery cable channel from the studs on the plenum front panel.
  10. Remove the positive battery cable clips from the studs on the plenum front panel.
    11. Fig 7: Positive Battery Cable
    GM1702803Courtesy of GENERAL MOTORS CORP.
  11. Remove the positive battery cable terminal from the mega fuse stud.
  12. Remove the positive battery cable from the vehicle.
About FixVault