FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Battery Jumper Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: Generator Battery Jumper Cable
    GM1702992Courtesy of GENERAL MOTORS CORP.
  1. Install the generator battery jumper cable to the vehicle.
    2. Fig 2: Generator Battery Jumper Cable
    GM1699546Courtesy of GENERAL MOTORS CORP.
  2. Install the generator battery jumper cable terminal (4) to the mega fuse stud.
    3. CAUTION:

    Refer to Fastener Caution .

  3. Install the generator battery jumper cable to the mega fuse nut (3).

    Tighten 

    Tighten the mega fuse nut to 9 N.m (80 lb in).

  4. Install the generator battery jumper cable clip (2) to the A/C evaporator tube.
  5. Install the generator battery jumper cable clip (1) to the stud.
    6. Fig 3: Mega Fuse Cover
    GM1702800Courtesy of GENERAL MOTORS CORP.
  6. Install the mega fuse cover.
    7. Fig 4: Battery Jumper Cable Terminal, Nut And Bolt
    GM1702914Courtesy of GENERAL MOTORS CORP.
  7. Install the generator battery jumper cable terminal (1) to the generator stud.
  8. Install the generator battery jumper cable nut (2) to the generator.

    Tighten 

    Tighten the jumper cable nut to 9 N.m (80 lb in).

  9. Position the generator battery jumper cable boot (3).
  10. Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  11. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault