FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Engine Ground Strap Replacement › Removal Procedure

Removal Procedure

    Fig 1: Engine Ground Strap
    GM1702850Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Remove the engine ground strap nut at the front plenum panel.
  3. Remove the ground strap terminal from the stud.
    4. Fig 2: Engine Ground Strap And Bolt
    GM1699550Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine ground strap bolt from the rear of the left cylinder head.
  5. Remove the ground strap from the vehicle.
About FixVault