FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Repair Instructions › Repair Instructions › Evaporative Emission Line Replacement - Engine › Installation Procedure

Installation Procedure

    Fig 1: EVAP Line And Canister Purge Solenoid
    GM1706143Courtesy of GENERAL MOTORS CORP.
  1. Connect the EVAP line quick connect fitting at the EVAP canister purge solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
  2. Connect the EVAP line quick connect fitting at the intake manifold. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
About FixVault