FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls And Fuel - 5.3L, 6.0L & 6.2L - Repair Instructions › Repair Instructions › Knock Sensor 2 Replacement › Removal Procedure

Removal Procedure

    Fig 1: Engine Wiring Harness Electrical Connector And Components
    GM1698087Courtesy of GENERAL MOTORS CORP.
  1. Lift and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Disconnect the engine wiring harness electrical connector (2) from knock sensor.
    3. Fig 2: Right Side Knock Sensor
    GM1402140Courtesy of GENERAL MOTORS CORP.
  3. Remove the knock sensor bolt (739) and knock sensor (718).
About FixVault