FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1210 (Hybrid Engine Electrical System) › Repair Instructions › Battery Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Yukon and 2008 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Battery Assembly, Hold Down & Bolt
    GM1968645Courtesy of GENERAL MOTORS CORP.
  1. Install the battery assembly (2).
    2. NOTE: Refer to Fastener Notice .
  2. Install the battery hold down (3) and bolt (1).

    Tighten:  Tighten the bolt to 25 N.m (18 lb ft).

    3. Fig 2: Locating Battery Components
    GM1968006Courtesy of GENERAL MOTORS CORP.
  3. Install the positive battery cable terminal (3) to the battery.
  4. Rotate the lever lock (1) clockwise until an audible click is heard in order to connect the positive battery cable.
  5. Position the positive battery cable insulating cover (2) over the positive terminal.
  6. Install the radiator support diagonal brace. Refer to Radiator Support Diagonal Brace Replacement .
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault