FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1301 (Battery, Charging System And Starting System) › Repair Instructions › Generator Bracket Replacement (4.3L) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Generator, Bracket & Bolts
    GM1877553Courtesy of GENERAL MOTORS CORP.
  1. Install the generator bracket onto the stud.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the generator bracket bolts and nut.

    Tighten:  Tighten the bolts/nut to 41 N.m (30 lb ft).

  3. Install the drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement - Right Side .
  4. Install the drive belt tensioner. Refer to Drive Belt Tensioner Replacement .
  5. Install the generator. Refer to Generator Replacement (4.3L) , Generator Replacement (6.6L)  or Generator Replacement (4.8L, 5.3L, 6.0L, and 6.2L) .
About FixVault