FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1804 (Battery, Charging System And Starting System) › Repair Instructions › Battery Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:

Refer to Battery Disconnect Warning .

    Fig 1: View Of Battery Cable Components
    GM1702504Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Open the starter solenoid cable cover at the positive battery terminal.
  3. Loosen the starter solenoid cable nut (5).
  4. Remove the starter solenoid cable from the positive battery terminal.
    5. Fig 2: View Of Front Fender Rear Upper Brace & Bolts
    GM1702811Courtesy of GENERAL MOTORS COMPANY
  5. Remove the right front fender rear upper brace bolts and the brace.
    6. Fig 3: View Of Battery Hold Down Retainer & Bolt
    GM1702812Courtesy of GENERAL MOTORS COMPANY
  6. Remove the battery hold down retainer bolt and the retainer.
  7. Remove the battery.
About FixVault