Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Refer to Battery Disconnect Caution
.
- Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
- Open the starter solenoid cable cover at the positive battery terminal.
- Loosen the starter solenoid cable nut (5).
- Remove the starter solenoid cable from the positive battery terminal.
- Reposition the starter solenoid cable out of the way.
- Remove the front fender rear upper brace bolts and brace.
- Remove the battery hold down retainer bolt and retainer.
- Remove the battery.