FixVault

Auxiliary Blower Control Module Replacement

Fig 1: Auxiliary Blower Control Module
GM1681989Courtesy of GENERAL MOTORS CORP.
Auxiliary Blower Control Module Replacement

Callout Component Name

Preliminary Procedure

  1. Remove the right rear quarter trim panel. Refer to Rear Quarter Trim Panel Replacement - Right Side (Extended Wheelbase) , Rear Quarter Trim Panel Replacement - Right Side (Standard Wheelbase) .
  2. Disconnect the blower motor control module electrical connector.
1 Screw, Blower Motor Resistor (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
1.5 N.m (13 lb in)
2 Module, Blower Motor Control