FixVault
Home › Cadillac › 2011 › Escalade EXT › Repair and Diagnosis › Steering › Steering Linkage System › Repair Instructions › Steering Linkage Inner Tie Rod Replacement › Removal Procedure

Removal Procedure

  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
    3. Fig 1: Inner Tie Rods Ends
    GM865341Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering linkage inner tie rod (1) from the relay rod using wrench J 34028  (2).
About FixVault