FixVault
Home › Cadillac › 2011 › SRX 2.8 6 › Repair and Diagnosis › Suspension › Wheel Alignment System › Repair Instructions › Rear Toe Adjustment

Rear Toe Adjustment

    Fig 1: Identifying Rear Suspension Adjustment Link Nuts
    GM2364789Courtesy of GENERAL MOTORS CORP.
  1. Loosen the rear suspension adjustment link nuts (1) and (3).
  2. Rotate the rear suspension adjustment link (2) until the proper specification is achieved. Refer to Wheel Alignment Specifications 
    3. CAUTION: Refer to Component Fastener Tightening Caution .
  3. Using a backup wrench, hold the rear suspension adjustment link (2) and tighten outer nut (1) to 150 N.m (110 lb ft), then tighten the inner nut (3) to 150 N.m (110 lb ft).
  4. Recheck the toe setting after tightening, readjust if necessary.
About FixVault