FixVault
Home › Cadillac › 2011 › STS AWD › Repair and Diagnosis › Suspension › Electronic Suspension › Suspension Control System - Suspension Leveling › Repair Instructions › Automatic Level Control Sensor and Bracket Replacement (Front) › Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
    3. Fig 1: Locating Front Ride Sensor Link
    GM1371682Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the front ride sensor link from the upper control arm ball stud.
  4. Disconnect the front ride sensor harness connector.
    5. Fig 2: View Of Front Ride Sensor
    GM1371680Courtesy of GENERAL MOTORS COMPANY
  5. Loosen the front ride sensor retaining nut.
  6. Gently tap the front ride sensor retaining stud in order to loosen the stud to fender connection.
  7. Remove the front ride sender from the vehicle.
About FixVault