Rear Camber Adjustment

Special Tools

• J 45845  Caster and Camber Adjusting Tool
• J-45845-10  Caster and Camber Adjusting Rod

Fig 1: Installing J 45845
Courtesy of GENERAL MOTORS COMPANY
1. Install the J 45845  or the J-45845-10  to the lower control arm and the frame.
2. Loosen the lower control arm to frame bolt.
CAUTION:

Refer to Fastener Caution .

3. Adjust the camber angle by turning the turnbuckle on J 45845  or the J-45845-10  until the specifications have been met.

   Tighten 

   Tighten the bolt to 135 N.m (96 lb ft).

4. Verify that the camber is still with specifications. Refer to Wheel Alignment Specifications .
5. Adjust the rear toe. Refer to Rear Toe Adjustment .