FixVault
Home › Cadillac › 2012 › CTS Base, 2D Coupe, AWD › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Bracket Replacement (LSA) › Installation Procedure

Installation Procedure

    Fig 1: Locating Generator Bracket To Engine & Mounting Bolts
    GM1455612Courtesy of GENERAL MOTORS COMPANY
  1. Install the generator bracket to the engine.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the generator bracket bolts (1, and 2) and tighten to 50 N.m (37 lb ft).
  3. Install the accessory drive belt idler pulley. Refer to Drive Belt Idler Pulley Replacement .
  4. Install the generator. Refer to Generator Replacement (LSA) , Generator Replacement (LFX) .
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Coupe) , Battery Negative Cable Disconnection and Connection (Sedan,Wagon) .
About FixVault