Installation Procedure
- Position the fuel filler tube to the vehicle (4).
- Connect the filler vent tube (3) to the evaporative emission (EVAP) hose. Refer to Plastic Collar Quick Connect Fitting Service
- Connect the fuel filler hose (2) to the fuel tank.
- Install the fuel filler tube brace bolt (1) and tighten to 3.5 N.m (31 lb in).
- Install the bolts (1) securing the fuel filler tube to the body and tighten to 9 N.m (80 lb in)
- Install the right rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement (Coupe) , Rear Wheelhouse Panel Liner Replacement (Sedan and Wagon)
- Install the right rear wheel. Refer to Tire and Wheel Removal and Installation
- Add fuel to the fuel tank.
- Inspect for fuel leaks.
- Install the fuel filler cap.
CAUTION:
Refer to Fastener Caution .