Windshield Side Reveal Molding Replacement

Fig 1: View Of Window Side Reveal Molding, Screws & Nuts

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Open the front door on the side the reveal molding is being serviced. Pull the door auxiliary weatherstrip up to the roof header. Remove the air inlet grille panel end cap.
1	Windshield Side Reveal Molding Retainer
2	Windshield Side Reveal Molding NOTE: Upon installation, tuck the bottom edge of the reveal molding under the end cap of the air inlet grille panel prior to the screw installation.
3	Windshield Side Reveal Molding Screw (Qty: 5) CAUTION: Refer to Fastener Caution . Tighten 2 (18 lb in)