FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › Electrical › Instrument Panel System Displays And Gauges › Diagnostic Information and Procedures › DTC P0464 › Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connectors at the fuel level sensor.
  2. While sweeping the fuel level sensor through its full range of motion, test for a minimum value less than 41 Ω and a maximum value greater than 119 Ω between the signal terminal C and the low reference terminal B.
    • If not within the specified range, replace the fuel level sensor.
About FixVault