FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › Engine Performance › Engine Control Systems › Engine Controls/Fuel - 5.3L, 6.0L, 6.2L - Repair Instructions › Repair Instructions › Fuel Level Sensor Replacement (1500 Series w/E85) › Installation Procedure

Installation Procedure

    Fig 1: Fuel Level Sensor Electrical Connectors
    GM1823400Courtesy of GENERAL MOTORS COMPANY
  1. Connect the fuel level sensor electrical connectors (1).
  2. Install the fuel level sensor to the module.
  3. Position and slide the fuel level sensor down until the retainers engage the sensor.
  4. Install the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (2500 LWB - 98.4L (26 gal) Tank Front) , Fuel Tank Fuel Pump Module Replacement (1500 SWB - 98.4L (26 gal) Tank + E85) , Fuel Tank Fuel Pump Module Replacement (1500 Series) , Fuel Tank Fuel Pump Module Replacement (2500 LWB - 43.5L (11.5 gal) Tank Rear) , Fuel Tank Fuel Pump Module Replacement (1500 LWB - 117.3L (31 gal) Tank + E85) .
About FixVault