FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1188 (Battery, Charging System And Starting System) › Repair Instructions › Engine Ground Strap Replacement › Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2008 GMC Yukon XL, 2008 GMC Yukon, 2008 Chevrolet Tahoe, 2008 Chevrolet Suburban, and 2008 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Ground Strap & Bolt
    GM1702850Courtesy of GENERAL MOTORS CORP.
  1. Remove the upper intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Remove the engine ground strap nut at the front plenum panel.
  3. Remove the ground strap terminal from the stud.
    4. Fig 2: View Of Engine Ground Strap & Bolt
    GM1699550Courtesy of GENERAL MOTORS CORP.
  4. Remove the engine ground strap bolt from the rear of the left cylinder head.
  5. Remove the ground strap from the vehicle.
About FixVault