Inflatable Restraint Vehicle Rollover Sensor Replacement

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Inflatable Restraint Vehicle Rollover Sensor & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the front center floor console bezel assembly, if equipped. Refer to Floor Console Bezel Replacement . Remove the center seat, if equipped. Refer to Front Center Seat Replacement .
1	Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 10 N.m (88 lb in)
2	Inflatable Restraint Vehicle Rollover Sensor Assembly Tip: Reposition carpet and/or wiring harness in order to access sensor. Disconnect the electrical connectors.

Callout

Component Name

WARNING: Refer to SIR Warning .

Preliminary Procedures

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Remove the front center floor console bezel assembly, if equipped. Refer to Floor Console Bezel Replacement .
Remove the center seat, if equipped. Refer to Front Center Seat Replacement .

Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 10 N.m (88 lb in)

Inflatable Restraint Vehicle Rollover Sensor Assembly
Tip:

Reposition carpet and/or wiring harness in order to access sensor.
Disconnect the electrical connectors.