FixVault

Circuit/System Testing

WARNING: This page is about a different car, the 2009 GMC Sierra, 2009 GMC Cab & Chassis Sierra, 2009 Chevrolet Silverado, and 2009 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X3 harness connector at the audio amplifier.
  2. Ignition ON, radio ON and un-muted, test for 0.5-1.0 volts between the amplifier control circuit terminal 11 and ground.
    • If greater than the specified value, test the amplifier control circuit for a short to voltage. If the circuit tests normal, replace the radio.
    • If less than the specified value, test the amplifier control circuit for a short to ground or an open/high resistance. If the circuit tests normal, replace the radio.
  3. If all circuits test normal, replace the amplifier.