FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1547 (Sunroof System) › Repair Instructions › Sunroof Track Timing/Synchronization (Extended Cab) › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, 2010 Chevrolet Silverado, and 2010 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the motor/actuator. Refer to Sunroof Motor/Actuator Replacement (Extended Cab)  or Sunroof Motor/Actuator Replacement (Crew Cab) .
  2. Connect the electrical connector to the motor/actuator.
  3. Install the headliner. Refer to Headlining Trim Panel Replacement (Crew Cab) or Headlining Trim Panel Replacement (Extended Cab) or Headlining Trim Panel Replacement (Regular Cab) .
  4. Perform the Initialization/Teach Procedure. Refer to Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab Existing Motor)  or Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab New Motor)  or Sunroof Motor/Actuator Initialization/Teach Process (Extended Cab Existing Motor)  or Sunroof Motor/Actuator Initialization/Teach Process (Crew Cab New Motor) .
  5. Verify the operation of the sunroof.
About FixVault