FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 156 (Supplemental Inflatable Restraint System) › Disabling & Activating Air Bag System › Disabling System › Zone 7

Zone 7

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2003 GMC Yukon XL, 2003 GMC Yukon, 2003 Chevrolet Tahoe, 2003 Chevrolet Suburban, and 2003 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn steering wheel to place vehicle wheels in straight-ahead position. Turn ignition off and remove key. Remove SIR fuse (15-amp) from fuse block, located in underhood fuse block.
  2. Remove Connector Position Assurance (CPA) clip from driver-side air bag module connector. See Figure. Disconnect driver-side air bag module connector.
  3. Remove CPA clip from passenger-side air bag module connector, located behind instrument panel support. Disconnect passenger-side air bag module connector.
  4. Remove CPA clip from driver side impact air bag module connector, located under driver seat. See Fig 1. Disconnect driver side impact air bag module connector. Remove CPA clip from passenger side impact air bag module connector, located under passenger front seat and disconnect connector.
Fig 1: Identifying Driver Side Impact Air Bag Module Connector (Passenger Side Impact Air Bag Module Connector Is Similar)
G99I24016Courtesy of GENERAL MOTORS CORP.
About FixVault