FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1583 (Hybrid Engine Electrical System) › Repair Instructions › Battery Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 GMC Sierra and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Battery Assembly, Hold Down & Bolt
    GM1968645Courtesy of GENERAL MOTORS CORP.
  1. Install the battery assembly (2).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the battery hold down (3) and bolt (1) and tighten to 25 N.m (18 lb ft).
    3. Fig 2: Locating Battery Components
    GM1968006Courtesy of GENERAL MOTORS CORP.
  3. Install the positive battery cable terminal (3) to the battery.
  4. Rotate the lever lock (1) clockwise until an audible click is heard in order to connect the positive battery cable.
  5. Position the positive battery cable insulating cover (2) over the positive terminal.
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
About FixVault