Removal Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2011 GMC Yukon XL, 2011 GMC Yukon, 2011 Chevrolet Tahoe, 2011 Chevrolet Suburban, and 2011 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Turn the ignition switch to the OFF position.
- Remove the spare tire and wheel assembly. Refer to Spare Wheel Hoist Replacement .
- Disconnect the trailer brake control relay electrical connector.
- Loosen, but do not remove, the trailer brake control relay bolts (1).
- Slide the trailer brake control relay (1) toward the rear of the vehicle and remove the trailer brake control relay.
NOTE:
Do not remove the spare wheel hoist.
NOTE:
It is not necessary to completely remove the bolts.