FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 564 (Wiper System & Washer System) › Repair Instructions › Washer Pump Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Washer Pump Seal To Washer Solvent Container
    GM174222Courtesy of GENERAL MOTORS CORP.
  1. Position the washer pump seal to the washer solvent container, pressing in until fully seated.
  2. Position the washer pump to the washer solvent container, pressing in until fully seated.
    3. Fig 2: Washer Pump Electrical Connector
    GM174219Courtesy of GENERAL MOTORS CORP.
  3. Connect the washer pump hose.
  4. Connect the washer pump electrical connector.
  5. Install the washer solvent container. Refer to Washer Solvent Container Replacement .
About FixVault