FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 587 (Front Suspension System) › Repair Instructions › Stabilizer Shaft Insulator Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Stabilizer Shaft Insulator Clamps, Stabilizer Shaft Link & Nuts
    GM66493Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the tire and wheel assemblies. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  3. Remove the stabilizer shaft from the vehicle. Refer to Stabilizer Shaft Replacement .
  4. Remove the stabilizer shaft insulators from the stabilizer shaft.
About FixVault