Inflatable Restraint Vehicle Rollover Sensor Replacement

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Inflatable Restraint Vehicle Rollover Sensor & Nuts

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Caution . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove front center floor console, if equipped. Refer to Console Replacement - Front Floor (Cadillac) or Console Replacement - Front Floor (Except Cadillac) . Remove center seat, if equipped. Refer to Seat Replacement - Center .
1	Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3) NOTE: Refer to Fastener Notice . Tighten: 10 N.m (88 lb in)
2	Inflatable Restraint Vehicle Rollover Sensor Assembly Tip: Reposition carpet and/or wiring harness in order to access sensor. Disconnect the electrical connectors.

Callout

Component Name

CAUTION: Refer to SIR Caution .

Preliminary Procedures

Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling .
Remove front center floor console, if equipped. Refer to Console Replacement - Front Floor (Cadillac) or Console Replacement - Front Floor (Except Cadillac) .
Remove center seat, if equipped. Refer to Seat Replacement - Center .

Inflatable Restraint Vehicle Rollover Sensor Nut (Qty: 3)

NOTE: Refer to Fastener Notice .

Tighten: 10 N.m (88 lb in)

Inflatable Restraint Vehicle Rollover Sensor Assembly
Tip:

Reposition carpet and/or wiring harness in order to access sensor.
Disconnect the electrical connectors.