Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2007 GMC Yukon XL, 2007 GMC Yukon, 2007 Chevrolet Tahoe, 2007 Chevrolet Suburban, and 2007 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the recirculation actuator.
- Install the recirculation actuator retaining screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
- Connect the electrical connector to the recirculation actuator (1).
- Install the air distribution duct. Refer to Air Distributor Duct Replacement .
NOTE:
Refer to Fastener Notice
.