FixVault

Circuit/System Testing

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, park lamps OFF, disconnect all of the lamp components on the I/P lamp dimming control circuit. Verify DTC B2652 00 does not set.
    • If the DTC resets, test for a short to voltage, short to ground, or an open in the I/P lamp dimming control circuit and for an open in the dimmer switch 5-volt reference circuit. If the circuit/connections test normal, replace the BCM.
  2. Reconnect each component one at a time and test for the DTC B2652 00.
    • If the DTC resets, replace that particular component.