FixVault
Home › Cadillac › 2012 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 866 (HVAC System - Automatic) › Repair Instructions › Inside Air Temperature Sensor Assembly Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new sensor grille to the headliner.
    2. Fig 1: Inside Air Temperature Sensor
    GM675994Courtesy of GENERAL MOTORS CORP.
  2. Install the inside air temperature sensor to the headliner and sensor grille.
    3. Fig 2: Disconnecting Inside Air Temperature Sensor Connector From The Inside Air Temperature Sensor
    GM675996Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector to the inside air temperature sensor.
  4. Install the left sunshade. Refer to Sunshade Replacement .
  5. Install the left center pillar garnish molding. Refer to Center Pillar Upper Garnish Molding Replacement .
  6. Install the left center assist handle. Refer to Roof Rail Rear Assist Handle Replacement .
  7. Install the left windshield garnish molding. Refer to Windshield Pillar Garnish Molding Replacement .
About FixVault