Installation Procedure

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Recirculation Actuator (Delphi)

Courtesy of GENERAL MOTORS CORP.

Install the recirculation actuator.

NOTE: Refer to Fastener Notice .

Install the recirculation actuator retaining screws.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).

Fig 2: Identifying Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector to the recirculation actuator (1).
Install the air distribution duct. Refer to Air Distributor Duct Replacement .
Re-calibrate the recirculation actuator. Refer to Actuator Recalibration .