Windshield Outside Moisture Sensor Replacement

WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rain Sensor Module & Components

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
1	Rain Sensor Module Trim Cover Procedure: Gently pry the trim cover outward in order to remove the cover from the rain sensor module.
2	Electrical Connector Procedure: Disconnect the electrical connector.
3	Rain Sensor Module and Retainer Clips Procedure Disengage the retaining clips from the mounting bracket on the windshield. Disengage the rain sensor lens from the module by disengaging the retainer clips. Clean the windshield where the old conductive jell residue is present. Tip: The rain sensor bracket is not serviced separately. The windshield will need to be replaced if the rain sensor bracket is loose or has been damaged.

Callout

Component Name

Rain Sensor Module Trim Cover
Procedure:
Gently pry the trim cover outward in order to remove the cover from the rain sensor module.

Electrical Connector
Procedure:
Disconnect the electrical connector.

Rain Sensor Module and Retainer Clips

Procedure

Disengage the retaining clips from the mounting bracket on the windshield.
Disengage the rain sensor lens from the module by disengaging the retainer clips.
Clean the windshield where the old conductive jell residue is present.

Tip: The rain sensor bracket is not serviced separately. The windshield will need to be replaced if the rain sensor bracket is loose or has been damaged.