Power Steering Pump Flow Control Valve Replacement - Off Vehicle
WARNING: This page is about a different car, the 2007 GMC Sierra and 2007 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Power Steering Pump Flow Control Valve Replacement - Off Vehicle
| Callout | Component Name |
|---|---|
| Preliminary Procedure: Remove the power steering pump assembly. Refer to Power Steering Pump Replacement (4.8L, 5.3L, 6.0L, and 6.2L) or Power Steering Pump Replacement (6.6L) or Power Steering Pump Replacement (4.3L) . |
|
| 1 | Power Steering Fluid Reservoir |
| 2 | Power Steering Pump Fitting
NOTE:
Refer to Fastener Notice
.
Tighten: 75 N.m (55 lb ft) |
| 3 | Power Steering Pump Fitting Seal Procedure: Apply power steering fluid to the power steering pump fitting seal before installing. |
| 4 | Power Steering Pump Flow Control Valve |
| 5 | Power Steering Pump Flow Control Valve Spring |